PROCESS MEASUREMENTS
& MONITORS, INC.
| 9643 Interline Avenue Baton Rouge, LA 70809 225-927-9415 |
300 East McNeese Street Suite 1B Lake Charles, LA 70605 337-477-0773 |
REMEMBER
New Equipment
Click on the adjacent image to learn more
Click on the adjacent image to learn more
In the Real World,
You Have a Real Mess. You have new sensors, transmitters and valves; old
sensors, transmitters and valves; and everything in between. You have these
PLC's or that DCS. Then, in came the PC's with this or that automation software.
To top it off… everything is scattered everywhere, indoors and out.
When its time to clean up your real mess, MOORE INDUSTRIES' new NET
Concentrator® System is your real solution. This process control and
distributed I/O network lets you use powerful new advances (like Ethernet, the
web and wireless) to interface something old with some new, or something new
with something old.
The 3080 Series precision digital test gauges provide portable,
high accuracy pressure measurement in a rugged and compact configuration. Microprocessor powered display
features provide the ability to tailor the operation of the instrument to meet
the specific requirements of most test and measurement applications. In
addition, the large backlit LCD and menu-driven display allow the user to easily
read and configure the readout. Along with a rugged 3" diameter 300
Series stainless steel enclosure and FM and CE compliance, the 3080 Series
gauges combine high precision and maximum utility to create the ideal "go
anywhere" pressure test and measurement solution.
905U-G
Wireless Gateway
The 905U-G communicates
using Elpro's 905U exception reporting peer-to-peer protocol on the radio
port, and maintains an internal I/O data base (or process image). The I/O
database interfaces with one of a range of data-bus protocols, Internet, or
TCP/IP. The field buses
available are Modbus, DF1, Profibus DP, Modbus TCP and Ethernet TCP/IP
(including Internet & email interface).
Drive 1200 Ω Power 2-Wire Transmitters
Source and Read 0.00 to ± 30.00 VDC with 4X over range
ability
Heise®
Models 3084, 3086 and 3089
Precsion Digital Test Gauge
The
905U-G Wireless Gateway interfaces 905U I/O units to external data bus systems,
or provides a wireless I/O interconection between different data buses.
The Model 532 4-20mA LOOP
CALIBRATOR
WITH BUILT-IN DIAGNOSTICS
Source and Read 0.000-24.000 mA
Simulate 2-Wire Transmitters
Make DYNAMIC loop readings under actual operating
conditions
Loop Diagnostics mode of operation simultaneously
eliminating multiple DMM connections. Included in the loop diagnostic features
is its ability to measure ground current leakage from faulty wiring, flooded
conduit, and corrosion bridges. This leakage subtracts from the signal current
sensed by the receiving system (ie: DCS), causing a measurement error.